Volume booster

A volume booster for audio files and video soundtracks: choose how much louder, and a limiter keeps the loudest moments from distorting. The file itself gets louder, so it plays louder everywhere.

Free, no sign-up, no watermark. When it’s done, you can also make subtitles from the same file.

Everything happens in your browser. Your file is not uploaded.

How the volume booster works

The volume booster multiplies every sample by the gain you choose, from +1 dB to +20 dB. Where that would push a peak past full scale, a look-ahead limiter lowers the gain for a few milliseconds before the peak and lets it recover afterwards, so the result is louder without the harsh crackle of clipping. The file is read and processed by your browser on your own device; nothing is uploaded to a server.

How to boost volume in three steps

  1. Choose the file

    Pick an audio file or a video. Its loudest point is shown in decibels once it has been read.

  2. Set the boost

    Move the slider from +1 dB to +20 dB; the percentage next to it shows how much the level is multiplied.

  3. Boost and download

    Select Boost the volume, listen to the louder version, and download it as MP3 or WAV.

Volume booster features

Up to +20 dB (1000%)

Choose the boost in steps of 1 dB; +6 dB doubles the level and +20 dB multiplies it by ten.

No clipping

A look-ahead limiter holds every peak just below full scale, so loud moments do not crackle.

Loudest point shown

See how much headroom the file has before you choose the boost.

Video soundtracks too

Choose a video and the booster saves its louder sound as MP3 or WAV.

Free, no sign-up

No account, no daily limit and no watermark or sound tag added to the file.

Nothing uploaded

The file is processed by your browser on your own device, so private recordings stay private.

How much to boost volume

When the file is read, the tool shows its loudest point in decibels (0 dB is full scale). That tells you how much room there is:

  • Loudest point around −10 dB: a boost of about +8 dB makes it louder with little limiting.
  • Loudest point near 0 dB: the file is already at full scale, so a boost mainly lifts the quiet parts while the limiter holds the peaks.
BoostLevel multiplied by
+3 dBabout 141%
+6 dBabout 200%
+10 dBabout 316%
+12 dBabout 400%
+20 dB1000%

Make audio louder for videos, calls and lectures

A lecture recorded from the back of the room, a call recorded at low level, or a phone video where the speaker is far away: make audio louder here, listen to the result, and download it as MP3 or WAV. Files up to 20 minutes long can be boosted. To keep only part of a recording, trim it first with the audio cutter.

Volume booster, normalizing and compression

Boosting adds the same gain everywhere, with the limiter catching the peaks. Peak normalizing raises a file until its loudest point reaches full scale — here, that is a boost equal to the loudest point shown, without the minus sign (−9 dB → +9 dB). Dynamic-range compression, the studio effect, narrows the gap between loud and quiet parts. For making a quiet recording easy to hear, a boost with a limiter is usually enough.

Volume booster output: MP3 or WAV

SettingSize per minute (stereo)Good for
MP3 128 kbpsabout 0.96 MBSpeech, podcasts, voice notes
MP3 192 kbpsabout 1.4 MBMusic and mixed audio, a safe default
MP3 320 kbpsabout 2.4 MBMusic you will edit or listen to closely
WAV (16-bit, 44.1 kHz)about 10.6 MBEditing in a DAW or video editor, no further loss

Louder audio, then captions

Quiet speech is also hard to follow, and captions help as much as volume. Select Make subtitles from this file under the result and the caption tool opens on this page with the same file: SubtitlePop listens to the audio, writes captions timed to every word, and lets you fix any word before you export an SRT, VTT or TXT file — or burn the captions into the video. See the auto subtitle generator, video to text and the SRT generator.

Volume booster FAQ

How do I increase audio volume without distortion?+

Choose a boost and the built-in limiter lowers the gain just before each peak that would clip, so the sound gets louder without crackling.

How do I make an MP3 louder?+

Choose the MP3, set the boost slider, select Boost the volume, and download the louder MP3.

How many decibels can the volume booster add?+

The volume booster adds from +1 dB up to +20 dB, which multiplies the level by up to ten (1000%).

Does the volume booster change my computer’s volume setting?+

The volume booster changes the audio file itself, so the louder version plays louder on every device without an extension or setting.

What is the difference between a volume booster and normalizing audio?+

A volume booster adds the gain you choose; normalizing adds exactly enough gain for the loudest point to reach full scale.

Is the file uploaded to make audio louder?+

Boosting the volume happens entirely in your browser. The file is read and processed by your browser on your own device; nothing is uploaded to a server.

Can I boost the volume of a video file?+

Choose the video and the booster reads its soundtrack; the louder sound is saved as an MP3 or WAV file.

Why does boosted audio sound flatter on loud parts?+

The limiter holds peaks below full scale, so very loud moments rise less than quiet ones; a smaller boost keeps more of the original dynamics.

Subtitles for your audio and video

Word-timed captions from any recording: check every word, then export SRT or burn them into the video.

Make subtitles free